Home > news > What is the operation process of the rewinder?
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672

Website: www.speedpro-msp.com

What is the operation process of the rewinder?
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2020-03-02

WinderIt is used for slitting the paper roll preliminarily wound on the paper reeling machine and rewinding it into a finished paper roll with width and tightness. In the process of rewinding, bad quality paper can also be removed, and the broken ends can be bonded. When all of us operate the rewinding machine, do you know what the operation process of the rewinding machine is?

The operation process of the rewinder is as follows:

1. The input voltage is three front lines and one zero line. When closing and pulling, you must hold the porcelain handle to avoid electric shock.

2. Use an Allen wrench every day to check whether the Phillips screw of the winding shaft is strong. If it is loose, tighten it in time.

3. Adhere to the cleanliness of the whole machine, wipe off the oil stains in time, and clean the plastic strips on the winding.

4. Feeding: The two large rubber shafts on the slitter rewinding machine cannot pass through the material to avoid scratching.

5. Distinguish the side selection of the electric eye, distinguish between manual and automatic, you can move the reel left and right when manual, and dial to manual when shut down.

6. When cutting, adjust the left and right installation of the unloading by hand wheel, so that the closing contact is in the middle of two switches.

The rewinding machine is used to rewind all kinds of tape, paper and film, such as BOPP tape, PE protective film, PET tape, double-sided tape, masking tape, cloth tape, polyester film tape, foam, etc. When we all use the rewinding machine, we all need to follow the above operation process to operate. The correct operation process is what we all need.